Silicone Glow in the Dark Owl Tongue
Made with high quality silicone and dyes, and the color is dyed through, so no worries of it rubbing off (not that it will rub on anything after being installed)
These are very squishy and life-like.
If you want to send in a fur or fabric sample, or even a paint sample for us to match, sure! Just send us an e-mail to arrange it. This has to be done BEFORE the order is placed!
If you choose the 2 or more color option, choose the "comment in box" color, and in the box type out what colors, and the pattern you want them in. (example: Pink glow in the dark white front black glow in the dark green back, or Pink glow in the dark aqua with brown glow in the dark white dapple, green glow in the dark green with blue glow in the dark blue stripe, etc) Each stripe counts as a "color", so if you want 3 stripes total, you HAVE to choose the 3 color option. If you choose 2 colors but want 3 stripes, we'll only do two.
*Bubbles/unrefined areas are a normal occurrence on the bottom of the tongues. This will not effect the appearance once these tongues are installed* Basically scratch up the area on the jawset real good, and then glue the tongue down.
Make sure to leave the fabric attached to the bottom of it!
Size: 1.5"L and 1"W, 1/2" wide at the tip.
These tongues will fit the owl blank but are too small for any others!
Glow in the dark tongues will glow in the dark once properly charged under a bright light. By "charged" we mean you let them sit under the bright light for an extended period of time. The best light is either direct sunlight, or a UV light.
*Glow powder will not change the color of the dyed item in the light, however the color of the dyed item might affect what color the item shows in the dark. Example: A pink item with green glow powder might actually look white in the dark, not green*
Green: 12+ hours
Blue: 6 Hours
Aqua: 10 Hours
Dark Blue: 3 hours
Orange: 1 Hour
Red: 1 Hour
*Facts about silicone that are good to keep in mind!*
Silicone is squishy, so the tongues will have a very lifelike appearance and feel.
You can "pierce" these tongues due to their soft nature.
Silicone items cannot be painted, unless you have a silicone specific paint.
Silicone cannot be glued to unless you have a silicone specific glue, so you have to leave the fabric backing on or sew it down.
Silicone tends to be grippy, so it will collect dust, dirt and fur. In order to keep this from happening, just dust it with a light layer of baby powder before you install and you should be OK.
In order to clean silicone from the debris it has picked up you can either use a piece of tape or other sticky surface (lint brush etc) to grab it all. Then apply your baby powder to keep it from happening in the future.
These tongues can be cut down in the back to make them fit into other jawsets they weren't designed for, so for example if you wanted a forked tongue in a k9 jawset if you cut the back of it down it would fit, but the jaw may have to sit open a little since it's a thicker tongue.