Silicone Glitter Toony Feetpads
Palm- 4.25" W x 2.25" T
Fingers- 1.5"T x 1.5" W
There are only 3 fingers per foot for these, so if you need extra toes please check this listing here.
This is for a SET, meaning if you order 1, you will get enough for 2 feet. These will not work on hands.
If you want to send in a fur or fabric sample, or even a paint sample for us to match, sure! Just send us an e-mail to arrange it. This has to be done BEFORE the order is placed!
This is for a set of feetpads, either in a single or multiple color depending on what you choose. These are lightly dyed and have lots of glitter in them. There is a layer of glitter on the surface that may wear down over time, however there is also glitter mixed into the silicone itself.
In the comment box, be sure to either type out a color, or give us a hex code. If you leave it blank, we will simply match the silicone color to the color of the glitter chosen.
If you choose the 2 or more color option, type out what colors and the pattern you want them in inside the box. (example: Pink w/pink glitter front black w/green glitter back, or Pink w/blue glitter with black w/purple glitter dapple, green w/green glitter with blue w/blue glitter toes, etc) Make sure you choose the 'two colored' option in all the drop down boxes!
Glitter Colors to choose from: Aqua, Black, Blue, Copper, Dark Blue, Dark Green, Dark Pink, Dark Purple, Gold, Gold Rush, Green, Glow in the Dark, Iridescent, Light Blue, Light Green, Light Pink, Light Purple, Orange, Pink, Red, Tiger's Eye, Silver, Silver Ghost, Yellow
All are made with a high quality squishy silicone and dyes. The color is dyed all the way through, so no worries on it rubbing off.
Simply cut out, and glue the backing down to shaved fur areas. It's also best to tack it down in a few areas with a needle and thread, to make sure it stays put.
*Facts about silicone that are good to keep in mind!*
Silicone items cannot be painted, unless you have a silicone specific paint.
Silicone cannot be glued to unless you have a silicone specific glue, so you have to leave the fabric backing on or sew it down.
Silicone tends to be grippy, so it will collect dust, dirt and fur. In order to keep this from happening, just dust it with a light layer of baby powder before you install and you should be OK.
In order to clean silicone from the debris it has picked up you can either use a piece of tape or other sticky surface (lint brush etc) to grab it all. Then apply your baby powder to keep it from happening in the future.